The logic dm101 is now out of service and will be going up for sale shortly....I've invested In a Gyrodec SE...peter has sent me the balls for the towers and the main bearing which I will be trying out shortly.....first thing I've done is put in the acrylic spacer Peter has just sent me....makes a big difference....spacer..rubber washer and nylon bolts hold the tonearm board/tonearm to the tt...which totally decouples any metal to metal contact between arm and table....the picture shows steel bolts...as at first I couldn't get the nylon bolts in...they were too tight to screw right down...however...I've run a bolt up and down the threads with superlube and I now have the nylon bolts holding it all to the table
[IMG]309 SPACER by alan moon, on Flickr[/IMG]
And below with images of the nylon bolts in place
[IMG]SME NYLON by alan moon, on Flickr[/IMG]
[IMG]SME NYLON 2 by alan moon, on Flickr[/IMG]
I'd just like to add....as with all these inexpensive tweaks and upgrades/improvements....everything can be put back to a stock Gyrodec....should you feel the need....
Last edited by mad-moon; 21-10-2017 at 22:22.
'ANDSOME IN THE SUMMER..'ORIBBLE IN THE WINTER. Barney Milne
Cambridge Audio CXN, Seagate nas drive, Michell Gyrodec SE, SME309, Benz M2 Ruby cantilever, Denon DL103, Primare R32, Densen D20, Densen D30, Cambridge Audio 840A V2 integrated, Pioneer SX-N30AE Network Stereo Receiver, Roksan Darius speakers, Technics speakers, Canon speakers, Bastanis Dragonfly Horns, REL Storm III sub, Target R1 speaker stands, Atacama Equinox.