Well I will hope to be at NEBO 15 as well.
I've been to every one bar the first one, as I didn't know about it until I saw a write up on here.
Joe will be well on with my Monoblocks, looking forward to that pairing.
Printable View
Well I will hope to be at NEBO 15 as well.
I've been to every one bar the first one, as I didn't know about it until I saw a write up on here.
Joe will be well on with my Monoblocks, looking forward to that pairing.
Yes they sounded very good together.
Looks like you've done ok there Ken
Let me know if you rebuild the xovers,do not know to do mine or leave well enough alone ,they are almost 40yrs old but they still sound good, especially with my 10w el84 mono's
cheers Mick
Hi Mick,Quote:
Originally Posted by mik_rik
Well they're very shiny!
They sound good to, so like you I am tempted to leave the crossovers alone.
I noticed the binding posts are just white metal and the internal hook up wire is just single strand bell wire, those are likely candidates for improvement, without harm.
There are a few variations around for the crossover, I don't know which I have as yet. One type has a separate protection circuit PCB mounted in one corner of the XO board.
The Tweeter series Cap, is a basic MKT Polyester Film Cap on most pictures and schematics I've seen. A decent Film cap here, or even a Foil, should not adversely affect the voicing, but should smooth and clean up the top end, not that its poor to start with.
The resistors are basic items, Jantzen Superes or mills MRA could replace these without upsetting things and maybe take a smidge of grain out.
The inductors seem fine and I would be tempted to leave the other Electro Caps alone.
These are only thoughts at present, till I get the Monoblocks and have a good listen, I'm not sure what, if anything, I'll do.
I might just pull the XO's and draw up the circuit I have installed. Maybe measure some of the parts, I can measure ESR on the Electro Caps at 3 set frequencies, using DATS (Dayton Audio Test system). Might be worth doing, in case they ever fail or go off spec and need replacing (presuming they are still in spec).
I can measure the inductors for wire gauge, inductance and DCR.
Or I might just leave well alone, it's early days, I'm not rushing in on these.
Gots ta say, i was blown away by these at NEBO bt these muthaz.
I think we were all surprised by them Steve, hence the lengths I went to, to secure a pair.Quote:
Originally Posted by Floyddroid
Mick (mik-rik) keeps surprising us that way, wonder what he'll bring next time. :D
Hi KenQuote:
Originally Posted by Qwin
trying to get the wife to come - I like rock music , but her choices will definately blow the cobwebs away,and Im not joking:)
Look forward to the next one. :-)
Hi Ken.
The Cantons look fantastic! My sort of speaker ... I guess they work nicely close to a wall?
Well that would make a refreshing change, not enough rock played in my opinion.Quote:
Originally Posted by mik_rik